Author: Michael John
-
How to Clean Burnt Oil?
If you have burnt oil on your cookware, don’t worry! It is easy to clean. First, fill the sink with hot soapy water. Then, using a scrubby sponge or steel wool, scrub the affected area until the burnt oil comes off. If necessary, use a little bit of elbow grease! Finally, rinse the cookware well…
-
How to Drain Transmission Oil?
The process of draining transmission oil is relatively simple and can be done at home with a few tools. First, locate the drain plug on the bottom of the transmission pan and place a drain pan underneath. Then, using a wrench, loosen the drain plug and allow the oil to drain out completely. Once finished,…
-
How to Fix Stripped Oil Drain Plug on Atv?
If the oil drain plug on your ATV is stripped, you will need to replace it. To do this, first remove the old plug by unscrewing it with a wrench. Then, clean the area around the drain hole with a rag to remove any dirt or debris. Next, take a new oil drain plug and…
-
How to Remove Oil Galley Plugs?
There are a few different ways that you can remove oil galley plugs. The most common way is to use a pair of pliers. Another way is to use a screwdriver. If the plug is really tight, you may need to use a hammer and punch to get it out. What are Oil Galley Plugs…
-
How to Check Oil Prius?
The oil in your Prius needs to be checked regularly to ensure that it is at the correct level and condition. You can check the oil level yourself by using the dipstick, or you can take it to a mechanic to have it checked. The oil should be dark brown or black in color and…
-
How to Oil a Standing Fan?
To oil a standing fan, you will need the following supplies: a clean rag, a small bowl of motor oil, and a Phillips head screwdriver. Begin by unplugging the fan from its power source. Next, use the screwdriver to remove the four screws that hold the front grille in place. With the grille removed, you…
-
How to Change Oil on an Inboard Boat Motor?
To change the oil on an inboard boat motor, you will need to locate the oil drain plug and unscrew it. Then, use a pump to remove the old oil from the reservoir. Once the old oil is removed, screw the drain plug back in and add new oil to the reservoir. Do Inboard Boat…
-
How to Tell If 2 Stroke Oil Pump is Working?
There are a few things you can do to test whether or not your 2 stroke oil pump is working. One is to check the oil level in the tank. If it’s low, then the pump isn’t working. Another way to tell is by starting up the engine and listening for a ticking sound. This…
-
How to Drain Oil?
Assuming you would like tips on how to drain your car’s oil: 1. Park your car on a level surface and wait until the engine is cool before beginning. 2. Find the oil drain plug underneath your car. It is typically located near the middle or back of the vehicle, close to where the oil…
-
How to Prime an Engine With Oil?
If your engine is starting to sound a bit ‘off,’ it might be time for an oil change. But before you do that, you need to prime the engine with oil. This will ensure that all of the moving parts in your engine are properly lubricated and won’t cause any damage when they’re running. Here’s…