A catch can is used in order to collect oil and other fluids that may be released during engine operation. In order to make a catch can, you will need a few supplies including: a container, hose, clamps, fittings, and grease. You will also need to drill a few holes in the container in order…
To remove oil from your windshield, you will need: 1. A clean, dry cloth 2. Glass cleaner 3. Vinegar 4. Baking soda 5. A squeegee (optional) Instructions: 1. Wipe the oil spot with a clean, dry cloth to remove as much excess oil as possible. 2. Spray the area with glass cleaner and wipe it…
If your oil rings are sticking, there are a few things you can do to try and unstick them. One is to use a steel pick or other sharp object to clean out the carbon buildup around the rings. Another is to heat up the engine with a torch and then try to push the…
If you are trying to determine if oil has friction modifiers, there are a few tests you can perform. One test is to add a small amount of the oil to a container of water and see if it forms beads or if it mixes evenly with the water. Another test is to put a…
The best way to dispose of motor oil soaked paper towels is to put them in a sealed container and throw them away with your regular trash. You can also take them to a local recycling center that accepts oil-soaked rags. What to Do With Motor Oil Soaked Paper Towels? If you’ve ever changed your…
To check the lower unit oil in a Yamaha outboard, first locate the oil fill/dipstick on the side of the engine. Remove the dipstick and wipe it clean with a rag. Reinsert the dipstick and remove it again to check the oil level. The oil should be at the full line on the dipstick. If…
If you’re not sure whether your outboard’s oil injection system is working, there are a few things you can check. First, look for any obvious leaks in the system. If there are no leaks, then check the oil level in the reservoir. If the oil level is low, then topping it off may solve the…
To clean motor oil off of your engine, you will need a few supplies. You will need a pan or catch basin to catch the oil drippings, rags or paper towels, dish soap, and a hose with a spray nozzle attachment. First, place the pan under the engine where the oil is dripping. Second, use…
To prime an oil pump, first make sure that the pump is mounted securely and the suction line is properly installed. Next, fill the pump with oil and then turn on the power. Once the power is on, slowly open the discharge valve until you see a steady stream of oil coming out. If the…
To change the transmission oil on a Harley Softail, you will need to drain the old oil and then refill the transmission with new oil. You will need to do this every few thousand miles to keep your transmission in good working condition. How Much Transmission Oil Does a Harley Softail Hold? The Harley-Davidson Softail…