Author: Michael John

Michael John Avatar
  • How to Fix a Head Gasket Oil Leak?

    If your car has an oil leak coming from the head gasket, there are a few things you can do to try and fix it. First, you can try tightening the bolts that hold the head gasket in place. If that doesn’t work, you can try replacing the head gasket altogether. You’ll need to take…

    Continue reading →

  • How to Connect Oil Catch Can?

    To connect an oil catch can, first make sure that the can is securely mounted in a location where it will not get in the way of any moving parts. Then, use a hose to connect the outlet of the catch can to the drain port on your engine block. Finally, use another hose to…

    Continue reading →

  • How to Install Oil Pressure Gauge Chevy 350?

    To install an oil pressure gauge on a Chevy 350, first remove the oil sending unit from the engine block. Next, install the new oil pressure gauge in its place and screw it in tightly. Finally, reconnect the electrical connector to the sending unit and start the engine to check that the gauge is working…

    Continue reading →

  • How to Tap Oil Pan for Turbo?

    First, identify the oil pan on your vehicle. It is typically a large, flat metal piece located near the bottom of the engine. Once you have located the oil pan, clean any dirt or debris off of it so that you can see what you are doing. Next, use a wrench to loosen the drain…

    Continue reading →

  • How to Remove Old Gasket from Oil Pan?

    Removal of an old gasket from an oil pan can be a difficult and messy task. The first step is to remove all of the oil from the pan. This can be done by draining the oil or sucking it out with a vacuum pump. Once the oil is removed, the next step is to…

    Continue reading →

  • How to Change Lower Unit Oil?

    To change the oil in your lower unit, you’ll need to start by draining the old oil. To do this, remove the drain plug from the bottom of the lower unit and allow the oil to drain into a container. Once all of the old oil has been drained, replace the drain plug and fill…

    Continue reading →

  • How to Check Oil on Harley Electra Glide?

    The Harley-Davidson Electra Glide is a touring motorcycle that was first introduced in 1965. It is powered by a V-twin engine and features a distinctive batwing fairing. Checking the oil level on this motorcycle is a relatively simple task that can be done in just a few minutes. To check the oil level, start by…

    Continue reading →

  • How to Check Motor Oil Hot Or Cold?

    The best way to check your motor oil is to do it when the engine is cold. If you check it when the engine is hot, you could get burned. How Do I Know If My Motor Oil is Hot Or Cold If you’re unsure about whether your motor oil is hot or cold, there…

    Continue reading →

  • How to Install Oil Temp Gauge?

    There are many different ways that you can install an oil temp gauge in your car. The easiest way is to purchase a pre-made kit that includes everything you need. Another option is to buy the individual parts and assemble the gauge yourself. Whichever method you choose, be sure to follow the instructions carefully so…

    Continue reading →

  • How to Fix at Oil Temp?

    If your car’s oil temperature is too high, there are a few things you can do to fix it. First, check the oil level and make sure it is full. If it is low, add more oil. Next, check the oil cooler and make sure it is clean and free of debris. If it is…

    Continue reading →