Author: Michael John
-
How to Repair a Stripped Out Aluminum Oil Pan?
If your aluminum oil pan has become stripped out, there are a few things you can do to repair it. First, try using a thread insert. This will allow you to screw in a new drain plug. If that doesn’t work, you may need to use an epoxy or other adhesive to secure the drain…
-
How to Remove Stuck Oil Cap?
The easiest way to remove a stuck oil cap is to use a pair of pliers. First, make sure that the engine is off and cool before attempting to remove the oil cap. Next, locate the small notch on the edge of the oil cap. Use the tips of the pliers to grip the notch,…
-
How to Jack a Car Up for Oil Change?
To jack a car up for an oil change, you will need to use a floor jack to lift the car up so that you can get underneath it. You will also need to have some oil drain pans ready so that you can catch the old oil as it drains out. Once you have…
-
How to Add Oil to Subaru Forester?
To add oil to your Subaru Forester, first park the vehicle on a level surface and then open the hood. Locate the oil dipstick near the front of the engine and remove it. Wipe off any dirt or debris from the dipstick with a clean cloth, reinsert it into the engine, and then remove it…
-
How to Change Gear Oil on Mercruiser Alpha One?
To change the gear oil on a Mercruiser Alpha One, first remove the drain plug from the bottom of the boat. Next, use a pump to remove the old oil from the reservoir. Finally, refill the reservoir with new gear oil and replace the drain plug. How Much Gear Lube Does a Mercruiser Alpha One…
-
How to Document Your Own Oil Changes?
Assuming you would like tips on documenting your oil changes: It is important to keep track of when you last changed your oil. This can be done by keeping a log or notebook in your car. You can also create a spreadsheet on your computer or phone. Be sure to include the date, mileage, type…
-
How to Remove Oil from Coolant System?
If your car’s coolant system is contaminated with oil, it needs to be flushed to prevent damage to the engine. Here’s how to do it: 1. Park your car on a level surface and let it cool completely. Then, remove the radiator cap and add an equal amount of water and coolant flush solution to…
-
How to Add Oil to Mercury Outboard 2 Stroke?
If your outboard is a two-stroke engine, it will require oil to be added to the fuel. The amount of oil that you need to add will depend on the size of your engine and the manufacturer’s recommendations. Most two-stroke engines will require you to mix the oil and fuel at a ratio of 50:1.…
-
How to Clean Oil off Your Engine?
Assuming you would like tips on how to clean oil off your engine: 1. If the oil is fresh, use hot water and dish soap to break down the oil. Rinse with hot water. 2. For older stains, use a degreaser or all-purpose cleaner. Apply liberally and scrub with a brush until the stain lifts.…
-
How to Check Oil Level in Tank?
Oil level in tank can be checked by using a dipstick. The dipstick is inserted into the oil tank and then withdrawn. The oil level is read from the markings on the dipstick. How Can I Measure How Much Oil is in My Tank? If you have an oil tank at home, it’s important to…