Author: Michael John

Assuming you would like tips on how to check your oil level in a Toyota Camry: 1. Park your car on level ground and shut off the engine. 2. Find the dipstick – it will have a yellow or orange handle and will be labeled “engine oil.” 3. Pull out the dipstick and wipe it…

Continue reading →

To check the oil level in your Toyota Camry 2019, first find the dipstick. It is located near the front of the engine, on the passenger side. Pull it out and wipe it clean with a rag. Reinsert it and pull it out again to check the oil level. The oil should be between the…

Continue reading →

Assuming you have already fixed the oil leak, start by cleaning the area with a degreaser. Then, using a pressure washer, remove all the degreaser and dirt. Next, using a clean cloth, apply brake cleaner to all of the dirty areas and let it sit for a few minutes. Finally, rinse everything off with water…

Continue reading →

Assuming you would like tips on how to change the oil in a 2019 Ford F150 with a 3.5L Ecoboost engine: 1) Jack up the truck and support it on jack stands. 2) Place an oil catch pan underneath the truck. 3) Locate the oil drain plug on the bottom of the oil pan and…

Continue reading →

To ask for an oil change, you will need to provide the technician with your car’s make, model, and year. You will also need to specify what type of oil you would like used. If you are unsure about what type of oil to use, the technician can help you choose the right one for…

Continue reading →

In order to measure 4.4 quarts of oil, you will need a measuring cup that holds at least 4 quarts. Place the empty cup on a level surface, then pour the oil into the cup until it reaches the 4-quart mark. Use a spoon or your finger to slightly dip below the surface of the…

Continue reading →

To change the oil on your Generac GP5500 generator, first shut off the engine and allow it to cool for at least 15 minutes. Then, remove the oil fill cap/dipstick and drain the oil into a suitable container. Next, clean the area around the oil drain plug and remove it before draining the remaining oil…

Continue reading →

If you’re looking to flush your engine oil with diesel, the process is actually quite simple. All you need is a container of fresh diesel fuel and a funnel. First, remove the oil dipstick from your vehicle and insert the funnel into the opening. Next, pour the diesel fuel into the funnel until the engine…

Continue reading →

To test for antifreeze in oil, you will need to purchase a testing kit from your local automotive store. Once you have the kit, follow the instructions on how to properly take a sample of your oil. After taking the sample, insert the provided strip into the oil and wait for the results. The strip…

Continue reading →

STP oil treatment can be added to your engine oil to help protect your engine and extend its life. It is a good idea to add STP oil treatment to your engine oil at each oil change. Adding STP oil treatment can help reduce wear on your engine, prevent deposits from forming, and improve fuel…

Continue reading →