Author: Michael John
-
How to Reset 2010 Dodge Ram Oil Light?
To reset the oil light on your 2010 Dodge Ram, simply press and hold the odometer button on your dash for about 5 seconds. After a few seconds, the oil light will come on and then go back off, indicating that it has been reset. How Do You Reset the Oil Light on a Dodge…
-
How to Remove Oil Stains from Teak Wood
There are a few ways that you can remove oil stains from teak wood. One way is to use a mild soap and warm water. Another way is to use a solution of vinegar and water. You can also try using a commercial cleaner specifically designed for removing oil stains from wood. How Do You…
-
How to Measure Oil Filter Size
To measure oil filter size, you will need a measuring tape and a filter wrench. First, use the measuring tape to measure the outside diameter of the filter housing. Then, use the filter wrench to remove the old filter and measure the inside diameter of the housing. Finally, compare these two measurements to determine the…
-
How to Change Fork Oil
This is a pretty straightforward process that can be done in your own garage with just a few tools. You’ll need a socket wrench, an oil catch pan, and some rags. First, you’ll want to warm up your bike so the oil is thinner and will drain out more easily. Next, use the socket wrench…
-
How to Get Stripped Oil Drain Plug Out
If your car’s oil drain plug is stripped, you may be able to remove it with a few household tools. First, try using a pair of pliers to grip the plug and twist it counterclockwise. If the pliers slip or the plug is still stuck, you can try using a screwdriver to pry it out.…
-
How to Repair a Cracked Oil Pan
If your car’s oil pan is cracked, you’ll need to replace it. To do this, first drain the oil from the engine and remove the oil filter. Then, remove the bolts that hold the oil pan in place and carefully remove the old pan. clean off any old sealant from the surface of the engine…
-
How to Place an Oil Pump in Ark
Place the Oil Pump in the water where you want to extract the oil. There is no need to place it on land. The Pump will automatically start extracting once placed and will continue until it has extracted all the oil in the area, or you turn it off. Where to Place Oil Pump Ark…
-
How to Stop Oil Leak from Oil Pan Bolt
If you have an oil leak coming from your oil pan bolt, there are a few things you can do to try and fix the issue. First, make sure the bolt is tight. If it is loose, tighten it with a wrench. If that does not work, then you may need to replace the gasket…
-
How to Get Rid of Metal Shavings in Oil
If you find metal shavings in your oil, it’s important to get rid of them as soon as possible. Metal shavings can come from many different sources, but they all have the potential to damage your engine. The best way to remove metal shavings from your oil is to use a magnet. You can either…
-
How to Check Motorcycle Engine Oil
First, find the dipstick and unscrew it. Wipe it off with a clean cloth and put it back in. Then, screw it in until you feel resistance and pull it out again. The oil level should be between the minimum and maximum lines on the stick. If it’s below the minimum line, add oil until…