Author: Michael John
-
How to Remove Broken Oil Dipstick Tube?
Removing a broken oil dipstick tube might seem tricky, but it’s a task you can handle with the right tools and method. A broken tube can let dirt into your engine, so fixing it quickly is important. In this guide, I’ll show you simple, step-by-step instructions to remove the broken tube safely and efficiently. Whether…
-
How to Get Water Out of Atv Oil?
To get water out of ATV oil, you will need to use a water separator. This is a device that will remove the water from the oil by using centrifugal force. How Do You Get Water Out of Engine Oil? If you find water in your engine oil, it’s important to get it out as…
-
How to Check Sportster Transmission Oil?
The transmission oil in a Sportster motorcycle should be checked at least once per year, or more often if the bike is ridden frequently or in dusty or wet conditions. To check the oil level, first, warm up the engine by riding the bike for at least 15 minutes. Then remove the dipstick from the…
-
How to Remove Oil Tank Cover on Sportster?
The first step is to remove the gas tank. Next, locate the oil tank cover on the left side of the engine. There are four bolts that hold the cover in place. Remove these bolts and lift off the cover. Inside the oil tank, there is a paper element filter. Inspect this filter and replace…
-
How to Drain All Oil from Engine?
The most complete way to drain the oil from your engine is to remove the oil pan. Once the oil pan is removed, you can drain the oil directly into a catch container. Be sure to clean off any dirt or debris that may be on the gasket surface before reinstalling the oil pan. Can…
-
How to Flush Engine before Oil Change?
To flush the engine before oil changing, place a drain pan under the oil drain plug. Then remove the oil drain plug and allow the oil to drain fully. After that, replace the oil drain plug and fill the engine with fresh oil. 4. Run the engine for a few minutes to circulate the new…
-
How to Change Mazda 6 Oil?
To change the oil in your Mazda 6, you will need: -5 quarts of motor oil -an oil filter -a wrench to remove the old filter (usually a 17mm) What Kind of Oil Change Does a Mazda 6 Need? If you own a Mazda 6, you’re probably wondering what kind of oil change it needs.…
-
How to Change Oil Mazda Cx-5?
The process for changing oil in a Mazda CX-5 is as follows: 1. Park the vehicle on level ground and set the emergency brake. 2. Raise the hood and locate the oil fill cap and dipstick. 3. Unscrew the oil fill cap, being careful not to lose it. 4. Using a funnel, pour in the…
-
How to Reset 2010 Dodge Ram Oil Light?
To reset the oil light on your 2010 Dodge Ram, simply press and hold the odometer button on your dashboard for about 5 seconds. After a few seconds, the oil light will come on and then go back off, indicating that it has been reset. How Do You Reset the Oil Light on a Dodge…
-
How to Remove Oil Stains from Teak Wood
There are a few ways that you can remove oil stains from teak wood. One way is to use a mild soap and warm water. Another way is to use a solution of vinegar and water. You can also try using a commercial cleaner specifically designed for removing oil stains from wood. How Do You…