Category: Blog
-
How to Reset Change Oil Light on Dodge Ram?
If your change oil light is on, there are a few things you can do to reset it. The first thing you need to do is find the oil dipstick and check the oil level. If the oil level is low, add more oil until it reaches the full line. Once the oil level is…
-
How to Check Oil on a Diesel Engine?
To check the oil level on a diesel engine, remove the dipstick and wipe it clean with a lint-free cloth. Insert the dipstick fully back into the engine, then remove it and check where the oil level falls on the dipstick. If it is below the minimum mark, add oil as needed. Do You Check…
-
How to Remove Crush Washer from Oil Drain Plug?
To remove a crush washer from an oil drain plug, use a pair of pliers to grip the washer and twist it off. If the washer is stuck, try heating it with a blow torch or other heat source until it becomes malleable enough to remove. How Do You Remove the Crush Washer from the…
-
How to Remove an Oil Pan That is Stuck?
You’ll need a few tools to remove a stuck oil pan. First, use a socket wrench to loosen the bolts that hold the oil pan in place. Next, use a pry bar to loosen the oil pan from the engine block. Finally, use a hammer to tap on the oil pan until it comes loose.…
-
How to Change Oil Without a Jack?
If your car doesn’t have a jack, don’t worry – you can still change your own oil. You’ll just need to get a little creative. Here’s how to do it: 1. Park your car on a level surface and set the emergency brake. Then, place a block of wood under each tire behind the wheels…
-
How to Jack Up a Car to Change Oil?
To jack up a car to change the oil, first park the car on level ground and set the parking brake. Place a jack under the frame of the car on the side you will be working on. Slowly turn the jack handle to lift the car off the ground until the tire is about…
-
How to Change Oil in 2018 F150 2.7 Ecoboost?
To change the oil in your 2018 F150 2.7 Ecoboost, you will need: -A new oil filter -5 quarts of synthetic motor oil (I recommend using full synthetic 0W40) -An oil catch can (optional but recommended) 1. Park your truck on level ground and engage the emergency brake. Place a jack under the front of…
-
How to Remove Moisture from Engine Oil?
Assuming you would like tips on how to remove moisture from engine oil: Condensation can form in your car’s engine oil when the temperature changes, causing the water to separate from the oil. This water-contaminated oil can cause corrosion and sludge build-up, which can damage your engine. There are a few ways you can remove…
-
How to Spray Motor Oil?
To spray motor oil, first make sure that the area is well ventilated. Next, put on gloves and a face mask to protect yourself from fumes. Then, pour the motor oil into a container with a nozzle attachment. Finally, point the nozzle towards the surface you wish to lubricate and squeeze the trigger to release…
-
How to Get Oil Out of 5 Gallon Bucket?
The easiest way to remove oil from a 5-gallon bucket is with a pump. You can purchase a hand-operated pump at most hardware stores. Simply insert the pump into the opening at the top of the bucket and start pumping. The oil will flow out of the bucket and into whatever container you have placed…