Category: Blog
-
How to Ask for Oil Change?
To request an oil change, inform the mechanic that you would like to have your oil changed. Indicate what type of oil you would like to use. The mechanic will then drain the old oil and replace it with fresh oil. What Do I Ask for When I Get an Oil Change? When you get…
-
How to Get Peanut Oil off Concrete?
If you have a peanut oil spill on your concrete, the best way to remove it is with a paper towel or rag. Soak up as much of the oil as possible, then use a mild dish soap and warm water to scrub the area. Rinse well and repeat if necessary. You can also try…
-
How to Test for Coolant in Oil?
To test for coolant in oil, take a sample and place it in a clear container. Then, add an equal amount of water to the container and shake it up. If you see any bubbles or foam forming on the surface of the mixture, that means there is coolant present in your oil. How Do…
-
How to Dispose of Oil Filters Correctly?
Oil filters can be recycled at most auto parts stores. The used oil and filter must be drained completely before recycling. Once the oil has been drained, the filter can be removed and placed in the recycling bin. How Do I Dispose of an Oil Filter That Has Been Drained? Assuming you have already drained…
-
How to Drain Oil from Honda Lawn Mower?
To drain the oil from your Honda lawn mower, first locate the oil fill cap and dipstick. Remove the cap/dipstick and wipe it clean with a rag. Next, place an oil catch pan underneath the mower’s engine. Locate the oil drain plug on the bottom of the engine and remove it using a wrench. Allow…
-
How to Oil a Condenser Fan Motor?
Instructions for oiling a condenser fan motor: 1. Unplug the power cord from the outlet and remove any fasteners holding the housing in place. 2. Remove the housing to access the fan blades and motor. 3. Locate the oil ports on the side of the motor (there may be more than one). 4. Insert an…
-
How to Remove Oil And Transmission Fluid from Concrete?
There are a few ways to remove oil and transmission fluid from concrete. One way is to use a product like Oil-Dri that will absorb the fluids. Another way is to use a pressure washer with detergent to break down and remove the fluids. What is the Fastest Way to Get Oil Out of Concrete?…
-
How to Oil a Red Ryder Bb Gun?
To oil your Red Ryder BB gun, first make sure it is unloaded. Then, using a drop of oil on the end of a clean rag, wipe down the length of the barrel. Next, apply a drop of oil to each pivot point on the gun, such as where the barrel meets the receiver and…
-
How to Remove a Rounded Oil Drain Plug?
If your oil drain plug is rounded, you will need to replace it. You can remove a rounded oil drain plug by using a pair of pliers. First, remove the old oil drain plug by unscrewing it with the pliers. Next, take the new oil drain plug and screw it into place. Finally, tighten the…
-
How to Remove Oil Film from Windshield?
To remove an oil film from your windshield, you will need: 1 cup rubbing alcohol, 1 cup water, 1 tablespoon dish soap, and a clean cloth. Combine the ingredients in a bowl and mix well. Dip the cloth into the mixture and wipe down your windshield. Rinse with clean water and dry. How Do You…