To change the transmission oil on a Harley Softail, you will need to drain the old oil and then refill the transmission with new oil. You will need to do this every few thousand miles to keep your transmission in good working condition.
- Park the bike on a level surface and put it in neutral
- Place a drain pan under the transmission drain plug and remove the plug to drain the oil
- Remove the filter cover and unscrew the filter element
- Allow the old oil to drain from the filter housing before removing it completely
- Install a new filter element and screw on the cover until it is snug
- Do not overtighten
- 5 Fill the transmission with fresh oil through the dipstick tube using a funnel
- Harley-Davidson recommends using SAE 80W-90 gear lube for most models
- Check your owner’s manual for specific recommendations
- 6 Start the engine and check for leaks around both plugs
How Much Transmission Oil Does a Harley Softail Hold?
The Harley-Davidson Softail models are a family of cruiser motorcycles with hidden rear shocks. The oil capacity for all three engines is 4 quarts (3.8 liters). This includes the Twin Cam 88 and 96, as well as the Milwaukee-Eight 107 and 114 engines.
The transmission on these models uses 80W-90 gear lube.
How Often Should You Change Transmission Fluid in a Harley-Davidson Motorcycle?
It is generally recommended that you change your Harley-Davidson motorcycle’s transmission fluid every 20,000 miles or so. Of course, this may vary depending on how often you ride your bike and what kind of riding you do (such as if you frequently ride in wet or dusty conditions). If you are unsure about when to change your transmission fluid, consult your bike’s owner manual or ask a qualified mechanic.
What Kind of Oil Goes in a Harley Softail Transmission?
The right oil for a Harley Softail transmission is 20W-50 motor oil. This type of oil has a high viscosity, which helps to protect the transmission components from wear and tear.
Where is the Transmission Drain Plug on a Harley?
The transmission drain plug on a Harley is located at the bottom of the transmission. In order to change the oil, you will need to remove the plug and drain the oil into a container.
How To Change Transmission Fluid – Harley Davidson Softail (Twin-Cam)
Softail Transmission Oil Type
Harley-Davidson recommends the use of their own brand of synthetic oils in their transmissions. This is because these oils have been specifically designed to provide the best possible protection for your transmission, while also providing optimal performance.
Harley Davidson Transmission Oil Type
When it comes to Harley Davidson transmission oil, there are a few different types that you can choose from. This can be a little bit overwhelming for some, but don’t worry – we’re here to help! In this blog post, we’ll go over the different types of Harley Davidson transmission oil so that you can make an informed decision about which one is right for your bike.
The first type of Harley Davidson transmission oil is synthetic. Synthetic oil is made from man-made materials and chemicals, as opposed to traditional oils which are derived from crude oil. Synthetic oils typically offer better protection and performance than traditional oils, making them a great choice for those who ride their Harley hard.
However, they also come with a higher price tag.
The second type of Harley Davidson transmission oil is semi-synthetic. Semi-synthetic oils are a blend of traditional and synthetic oils, offering some of the benefits of both types.
They tend to be less expensive than fully synthetic options while still providing good protection and performance.
The third type of Harley Davidson transmission oil is mineral-based. Mineral-based oils are derived from crude oil and offer the lowest price point out of all the options.
However, they don’t provide the same level of protection or performance as synthetic or semi-synthetic options. They’re a good choice for those who don’t ride their Harley often or for those on a budget.
Now that you know about the different types of Harley Davidson transmission oil, it’s time to decide which one is right for you and your bike!
3 Hole Oil Change Harley Softail
3 hole oil changes for Harley Softails are a great way to change your oil without making a mess. This method is simple and clean, and it doesn’t require any special tools. All you need is a drain pan, an oil filter wrench, and three quarts of your favorite motorcycle oil.
To begin, warm up your engine by riding it for a few minutes. This will help the oil flow more easily. Next, put the drain pan under the motorcycle’s engine and remove the oil filler cap.
Using the filter wrench, loosen the oil filter and let the used oil drain into the pan. Once the flow of used oil has slowed to a trickle, replace the filter with a new one.
Now it’s time to add fresh oil to your bike.
Pour in three quarts of new motorcycle oil into the fill hole. Be sure not to overfill – stop when you reach the “full” mark on your dipstick. Finally, replace the fill cap and start up your engine to check for leaks.
If everything looks good, you’re finished!
Harley 5 Speed Transmission Oil Capacity
The Harley 5 Speed Transmission has a oil capacity of approximately 2 quarts. The recommended oil to use is SAE 80W-90 gear oil.
Conclusion
If you have a Harley Softail, it’s important to change the transmission oil regularly. Here’s how to do it:
1. First, warm up the engine by riding for about 15 minutes.
This will help the oil flow more easily.
2. Next, remove the drain plug and catch the oil in a container.
3. Once all the old oil has drained out, replace the drain plug and fill the transmission with new oil.
Use a funnel if necessary.
4. Finally, check the level of the new oil and add more if needed.
Leave a Reply