To install a Mercury oil block off kit, first remove the lower unit. Next, remove the oil pump and block the oil feed hole with the provided plug. Finally, reassemble the lower unit without the oil pump.
- The first step is to purchase the Mercury oil block off kit from a local retailer or online store
- Next, locate the oil filter housing on the engine and remove the old filter element
- Once the old filter element is removed, unscrew the oil cooler lines from the housing and discard them
- Now, take the new gasket that comes with the kit and apply a thin layer of sealant to it
- Install the gasket onto the housing and then screw on the two supplied plugs hand-tight
- Finally, re-install the housing onto the engine using the original bolts and torque them to spec
- Start up the engine and check for any leaks coming from around
How Do You Bypass a 2 Stroke Oil Injection?
Assuming you are referring to a 2 stroke oil injection system on a motorcycle, there are a few ways to bypass it. One way is to drill a small hole in the bottom of the oil tank. This will allow the oil to bypass the injection system and mix with the fuel in the carburetor.
Another way is to remove the oil injection pump entirely and block off all the hoses. This will require you to premix your fuel at a ratio of about 40:1.
How Does Oil Injection Work on a 2 Stroke Mercury Outboard?
Oil injection on a 2 stroke Mercury outboard works by mixing the oil and gas in the proper ratio and then injecting it into the engine. This allows for a more efficient burn of the fuel and oil mixture and also helps to protect the engine from wear and tear. The oil injection system on a Mercury outboard is made up of a few different parts, including an oil pump, an injector, and a control unit.
The oil pump is responsible for drawing the oil from the tank and delivering it to the injector. The injector then mixes the gas and oil together in the correct ratio before sending it into the engine. The control unit monitors everything that is going on with the system and makes sure that everything is running smoothly.
Mercury XR6 150hp 2.5l oil injection delete
Mercury Oil Injection Delete Kit
If you’re the proud owner of a Mercury outboard motor, you may be looking for ways to increase its performance. One popular modification is an oil injection delete kit.
An oil injection delete kit allows your outboard to run without the use of oil injection.
Oil injection systems force-feed lubricating oil into the engine, and while they offer many benefits, they can also cause issues like increased wear and tear on engine parts.
Without oil injection, your outboard will require you to mix fuel and oil yourself – but don’t worry, it’s not as difficult as it sounds! The ratio you’ll need to use depends on the make and model of your outboard, so be sure to consult your owner’s manual before getting started.
Once you have the correct fuel/oil mixture, simply pour it into the tank and you’re good to go! An oil injection delete kit is a simple but effective way to improve the performance of your Mercury outboard motor.
90 Hp Mercury Oil Block off Kit
If you have a 90 hp Mercury outboard motor, you may be wondering if there is an oil block off kit available. The answer is yes! There are kits available that will allow you to block off the oil injection system on your motor.
This can be beneficial for a number of reasons.
First, it can help improve the performance of your engine. By blocking off the oil injection system, your engine will no longer be constantly lubricated.
This can lead to increased power and efficiency. Additionally, it can help to extend the life of your engine by preventing wear and tear on the internal components.
If you are interested in purchasing an oil block off kit for your 90 hp Mercury outboard motor, there are a few things to keep in mind.
First, make sure that the kit you purchase is compatible with your specific model of motor. Second, research different kits to find one that fits your budget and needs. And finally, installation instructions vary between kits so be sure to read all directions carefully before beginning any work on your engine.
How to Bypass Oil Injection on Mercury Outboard
As boaters, we all know that oil is a vital component to the longevity and performance of our engines. Mercury outboards are no different. However, there may come a time when you need to bypass your outboard’s oil injection system.
Here’s how:
1. First, locate the oil injector pump on your engine. This is typically located near the carburetor(s).
2. Next, disconnect the electrical connector from the pump.
3. Then, remove the two bolts that hold the pump in place and carefully remove it from the engine.
4. Once the pump is removed, you will need to block off the oil supply lines leading to and from the pump using plugs or tape (be sure not to use anything that can easily break or fall off).
Mercury 2 Stroke Oil Injection Delete
If you own a Mercury 2-stroke outboard boat motor, you may be wondering about the oil injection delete. This is a popular modification that many Mercury owners make to their motors.
The oil injection delete kit includes everything you need to remove the oil injection system from your motor.
This includes the block off plates, gaskets, and hardware. Once installed, you will need to mix your own fuel and oil mixture. Many people find this to be a more convenient and less messy option than dealing with the oil injection system.
There are several reasons why people choose to remove the oil injection system from their Mercury motors. One reason is that it can improve engine performance. Another reason is that it can extend the life of your engine by reducing wear and tear on internal components.
And finally, some people simply prefer the simplicity of mixing their own fuel and oil mixture.
If you’re considering removing the oil injection system from your Mercury 2-stroke outboard motor, be sure to do your research and purchase a quality delete kit from a reputable source.
Conclusion
Installing a Mercury oil block off kit is a great way to improve the performance of your engine. By eliminating the need for an oil filter, you can reduce weight and friction, which will increase power and fuel economy. The kit comes with everything you need to install it, including detailed instructions.
Leave a Reply