To reset the oil light on your 2010 Dodge Ram, simply press and hold the odometer button on your dash for about 5 seconds. After a few seconds, the oil light will come on and then go back off, indicating that it has been reset.
- Turn the key to the “On” position, but do not start the engine
- Press and release the gas pedal three times within five seconds
- Start the engine and let it idle for about two minutes
- Shut off the engine and check that the oil light has reset itself
How Do You Reset the Oil Light on a Dodge Ram 1500?
Assuming you would like a blog post discussing how to reset the oil light on a Dodge Ram 1500:
“How to Reset the Oil Light on a Dodge Ram 1500”
If your oil light is on in your Dodge Ram 1500, it’s time for an oil change.
But before you can change the oil, you need to know how to reset the oil light. Here’s a quick guide on how to do it.
First, find the button that says “Mode.”
It should be located on the instrument panel near the speedometer. Press and hold this button until the word “SETUP” appears in the display.
Now use the arrow buttons to scroll through the menu options until you see “Oil Life Reset.”
Press and hold this option until it resets to 100%.
Now that your oil life is reset, you can go ahead and change your oil according to your manufacturer’s recommendations.
How Do You Reset the Oil Change Light on a 2010?
The oil change light on a 2010 model year vehicle can be reset by performing the following steps:
1. With the ignition in the ON position, press and release the accelerator pedal three times within five seconds.
2. Observe the message center for the oil life indicator to begin counting down from 100%.
3. Once the countdown is complete, the oil change light will turn off and you are good to go!
How Do You Reset the Oil Light on a 2009 Dodge Ram 1500?
If your oil light is on, it means that your engine is not getting enough oil. You need to add oil to your engine as soon as possible.
To reset the oil light on a 2009 Dodge Ram 1500, first turn the ignition key to the “On” position without starting the engine.
Then, press and release the gas pedal three times within five seconds. Finally, turn the ignition key to the “Off” position and wait for at least five seconds before starting the engine again.
How Do You Reset the Oil Light on a 2011 Ram 1500?
When you change the oil in your 2011 Ram 1500, you will need to reset the oil light. This can be done by turning the key to the “On” position without starting the engine. Then, press and hold down the gas pedal for about three seconds.
After that, turn the key off and then start the engine as normal. The oil light should now be reset.
Reset Oil Maintenance Light – 2008 to 2012 Dodge Ram
Reset Oil Change Dodge Ram 2008
If you’re looking to reset the oil change light on your 2008 Dodge Ram, here’s what you need to do. First, locate the oil change button on the instrument panel. It should be located near the speedometer and odometer.
Press and hold this button for about 5 seconds until the oil change light comes on. Once it does, release the button and press it again for another 5 seconds. This will reset the oil change light and you’re all set!
2011 Ram 1500 Oil Reset
The 2011 Ram 1500 comes with an oil reset feature that helps to keep track of your oil changes. This is a great feature for those who want to make sure they are keeping up with their maintenance schedule. To reset the oil light, simply press and hold the trip odometer button for about 10 seconds.
The oil light will then flash and the display will show “0 miles since last oil change.” You can then release the button and start driving again.
Ram 1500 Reset Oil Life
It’s important to keep track of the oil life in your Ram 1500 and reset the indicator when necessary. Here’s a quick guide on how to do it:
1. Start the engine and let it run for a few minutes.
2. Turn off the engine and open the hood.
3. Locate the oil life reset button, which is usually located near the oil filter housing.
4. Press and hold the reset button for about 5 seconds until you see “100%.”
5. Close the hood and you’re all set!
Reset Oil Change Dodge Ram 2019
The 2019 Dodge Ram is a full-size pickup truck that seats up to six passengers. It has a standard eight-speed automatic transmission and four-wheel drive. The Ram 1500 comes standard with a 3.6-liter V6 engine that produces 305 horsepower and 269 lb-ft of torque.
It has a maximum towing capacity of 7,730 pounds and can haul up to 1,880 pounds in its bed. Fuel economy for the V6 engine is an EPA-estimated 17 mpg city/23 mpg highway/19 mpg combined.
Conclusion
If you’re like most drivers, you probably don’t think much about your car’s oil light. However, it’s important to pay attention to this warning sign, as it can indicate a serious problem with your engine. Luckily, resetting the oil light on a 2010 Dodge Ram is a fairly simple process.
Here’s what you need to do:
1. Start the engine and let it idle for a few minutes. This will allow the oil to warm up and circulate throughout the engine.
2. Turn off the engine and wait a few minutes for all the oil to drain back into the pan.
3. Remove the dipstick and wipe it clean with a rag or paper towel. Reinsert the dipstick and check the level of oil on it.
If the level is low, add more oil until it reaches the full mark.
Leave a Reply