If your change oil light is on, there are a few things you can do to reset it. The first thing you need to do is find the oil dipstick and check the oil level. If the oil level is low, add more oil until it reaches the full line.
Once the oil level is full, turn the key to the ON position without starting the engine. Press and release the gas pedal three times within five seconds. This will reset the computer and turn off the change oil light.
- Park your Dodge Ram in a level area and turn off the engine
- Locate the oil life sensor, which is usually located on the driver’s side of the vehicle near the oil filter
- Disconnect the negative battery cable from the terminal using a wrench
- Remove the oil life sensor with a socket wrench and discard it
- Install a new oil life sensor by hand until it is snug, then tighten it with a socket wrench
- Reconnect the negative battery cable to the terminal using a wrench and start your engine
How Do You Reset the Oil Change Light on a 2012 Dodge Ram 1500?
Assuming you would like a blog post discussing how to reset the oil change light on a 2012 Dodge Ram 1500:
“How do you reset the oil change light on a 2012 Dodge Ram 1500?”
If you need to reset the oil change light on your 2012 Dodge Ram 1500, here’s what you’ll need to do.
First, locate the “trip odometer” button on your vehicle’s dashboard. Once you’ve found it, press and hold the button until the display shows “oil life 100%.” This will indicate that your car is due for an oil change.
If your vehicle is equipped with the Maintenance Minder system, you can also follow these steps to reset the oil change light:
1. Turn the ignition switch to ON (II).
2. While pressing and holding down the trip odometer button, turn the ignition switch OFF (I).
3. Release both buttons within five seconds after turning off the engine. The word “RESET” should appear in the odometer/trip display after completing this procedure successfully.
How Do You Reset the Oil Light on a 2014 Ram 1500?
If your oil light is on, it means that your engine is low on oil. To reset the oil light on your 2014 Ram 1500, simply add more oil to your engine. Once the oil level is back up to where it should be, the light will turn off automatically.
How Do You Reset the Oil Change Light on a 2010 Dodge Ram 1500?
To reset the oil change light on your 2010 Dodge Ram 1500, simply press and hold the odometer button on your instrument panel for about 5 seconds. The oil change light will then flash and reset itself.
How Do You Reset the Oil Change Light on a 2015 Dodge Ram?
If you need to reset the oil change light on your 2015 Dodge Ram, here’s what you’ll need to do. First, locate the oil life sensor on the instrument panel. It’s a small button that looks like a wrench.
Press and hold this button for about 5 seconds until the oil change light flashes. Then, start the engine and wait for the oil change light to turn off. That’s it!
You’ve now reset the oil change light on your 2015 Dodge Ram.
How to reset oil change required light on a 2018 Dodge Ram
Ram 1500 Reset Oil Life
If you own a Ram 1500 truck, you may be wondering how to reset the oil life indicator. This is a simple process that can be done in just a few minutes. Here’s what you need to do:
1. Start the engine and let it run for a few minutes.
2. Turn off the engine and open the hood.
3. Locate the oil dipstick and remove it from the engine.
4. Wipe the dipstick clean with a rag or paper towel.
5. Insert the dipstick back into the engine and screw it in tight. Make sure that it’s seated all the way down into the tube before continuing.
6.7 Cummins Oil Change Reset
If you own a 6.7 Cummins, or are thinking about purchasing one, you may be wondering how to reset the oil change light. This is actually a pretty simple process that can be done in just a few minutes. Here’s what you need to do:
First, start the engine and let it idle for a few minutes. Then, turn off the engine and disconnect the negative battery cable. Next, locate the oil filter housing and remove the old filter.
Be sure to dispose of it properly.
Now, install the new filter and screw on the housing until it is tight. Reconnect the negative battery cable and start up your engine.
The oil change light should now be reset!
Ram 1500 Oil Life Won’T Reset
If you own a Ram 1500, you may have noticed that the oil life indicator doesn’t reset after an oil change. This can be frustrating, especially if you’re trying to keep track of your vehicle’s maintenance schedule. Here’s what you need to know about the oil life indicator in your Ram 1500.
The oil life indicator is designed to let you know when it’s time to change your oil. It uses sensors to monitor your engine’s conditions and calculate how much wear and tear has occurred. When the indicator reaches zero, it means that your engine is at risk of damage and it’s time for a fresh batch of oil.
However, the oil life indicator in the Ram 1500 has been known to malfunction. Sometimes it won’t reset after an oil change, even though the old oil has been drained and new oil has been added. This can be due to a number of factors, including a faulty sensor or an issue with the vehicle’s computer system.
If you’re having trouble with your Ram 1500’s oil life indicator, there are a few things you can do. First, check the owner’s manual to see if there’s a way to manually reset the indicator. If not, take your truck to a reputable dealership or mechanic and have them diagnose and fix the problem.
In most cases, this will require replacing a part or updating the software in your vehicle’s computer system.
Dodge Ram Oil Change Indicator
The oil change indicator on your Dodge Ram is designed to let you know when it’s time to change your engine oil. It’s important to keep up with your oil changes, as they help keep your engine running smoothly and efficiently. Here’s what you need to know about the oil change indicator on your Dodge Ram.
When should I change my oil? The oil change indicator on your Dodge Ram will come on when it’s time to change your engine oil. Depending on how often you drive and the conditions you drive in, this can be anywhere from 3,000 miles to 10,000 miles.
However, it’s always best to consult your owner’s manual for specific recommendations.
How do I reset the indicator? Once you’ve changed your engine oil, you’ll need to reset the indicator.
This can usually be done by pressing a button or turning a knob on the dashboards of most models. However, again, it’s always best to consult your owner’s manual for specific instructions for your particular model year.
Why is it important to keep up with my oil changes?
Oil changes are important because they help keep all the moving parts in your engine lubricated and working properly. Over time, motor oil breaks down and gets dirty, so it needs to be replaced periodically in order to ensure peak performance from your engine.
Conclusion
If you need to reset the change oil light on your Dodge Ram, there are a few things you’ll need to do. First, find the oil dipstick and remove it. Next, locate the oil fill cap and unscrew it.
With the dipstick and fill cap removed, use a funnel to add fresh oil to your engine until it reaches the “Full” mark on the dipstick. Finally, screw the fill cap back on and reinsert the dipstick. Once everything is back in place, start up your engine and let it run for a few minutes.
The change oil light should now be reset!
Leave a Reply