The 2011 Subaru Forester takes 5W-30 synthetic oil.
If you own a 2011 Subaru Forester, you might be wondering what kind of oil it takes. The answer is synthetic 0W-20 oil. This type of oil is designed to help improve fuel economy and reduce emissions.
It can also help your engine run more smoothly and efficiently.
Does a 2011 Subaru Forester Need Synthetic Oil?
Yes, a 2011 Subaru Forester needs synthetic oil. The reason for this is because synthetic oil is designed to last longer and perform better than conventional oil. It also has a higher resistance to breaking down in high temperatures, which can be beneficial in hot weather climates.
Can I Use 5W-30 Instead of 0W20 in the Subaru Forester?
If you own a Subaru Forester, it is important to know what type of oil to use in order to keep your vehicle running properly. Many people are unsure whether they can use 5W-30 oil instead of 0W20 oil in their Forester. The answer is yes, you can use 5W-30 oil in your Forester as long as the temperatures are not too cold.
However, if the temperatures do drop below freezing, it is best to switch to 0W20 oil.
What Oil is Best for Subaru Forester?
The best oil for the Subaru Forester would be synthetic motor oil. This is because it will provide the engine with better protection and lubrication. It will also last longer than conventional motor oils.
Does a Subaru Forester Need Full Synthetic Oil?
Yes, a Subaru Forester needs full synthetic oil. The oil helps to keep the engine clean and running smoothly. It also helps to protect against wear and tear.
Subaru Forester Oil change + Air filter | 2011 4-Cyl, PZEV, 2.5 Liter | SH – Third Generation |
2011 Subaru Forester Oil Problems
If you own a 2011 Subaru Forester, you may have experienced oil problems. This is a common issue with this model year and one that has been well-documented. The good news is that Subaru has issued a recall for this problem, and will repair your vehicle free of charge.
The oil problems stem from an issue with the engine’s piston rings. Over time, these rings can wear down and cause oil to leak into the combustion chamber. This can lead to a loss of power and decreased fuel economy.
In severe cases, it can also cause engine damage. If you think you may be affected by this recall, the first thing you should do is contact your local Subaru dealer. They will be able to tell you if your vehicle is included in the recall and schedule an appointment for the repairs.
It’s important to get this taken care of as soon as possible, as continuing to drive with an affected vehicle could cause further damage.
2011 Subaru Forester Oil Filter Type
The 2011 Subaru Forester features a 2.5L DOHC 16-valve 4-cylinder horizontally opposed Boxer engine with Active Valve Control System (AVCS). The engine is mated to a 5-speed manual or optional 4-speed automatic transmission. Along with the usual suspects of power steering and front, ventilated disc brakes, the Forester comes standard with Vehicle Dynamics Control (VDC) and Hill Start Assist (HSA).
The VDC system uses sensors to monitor speed, yaw rate, and lateral G-forces. If it detects that the vehicle is losing control, it intervenes by reducing engine power and/or applying brake pressure to individual wheels. HSA prevents the vehicle from rolling backward when starting on an incline by maintaining brake pressure for a few seconds after the driver lifts their foot off the brake pedal.
All Subarus come with Symmetrical Wheel Drive as standard equipment, and the Forester is no different. This AWD system constantly monitors traction conditions and sends power to where it’s needed most in order to maintain stability and grip, even in less-than-ideal road conditions. When it comes time for an oil change, be sure to use SAE 5W30 synthetic oil in your 2011 Forester.
The recommended oil filter for this model is a Mann Filter W 920/6.
2011 Subaru Forester Oil Capacity
The 2011 Subaru Forester has a 2.5L engine with an oil capacity of 4.2 quarts (3.9 liters). The oil type is SAE 5W-30 synthetic and the filter part number is 15208AA12A. For the turbocharged models, the capacity is 4.8 quarts (4.5 liters) and the recommended oil type is SAE 5W-30 synthetic as well.
2011 Subaru Forester Oil Change
If you own a 2011 Subaru Forester, it’s important to keep up with regular maintenance and service – including oil changes. Depending on your driving habits, you may need to change your Forester’s oil every 5,000 miles or so. Fortunately, changing the oil on a Subaru Forester is a pretty simple process that you can do yourself at home.
Here’s what you’ll need: -5 quarts of synthetic motor oil (0W-20 weight recommended) -Oil filter (Subaru part number 15208AA15A)
-Funnel -Socket wrench set and ratchet -Drain pan
-Rags or paper towels First, park your Forester on a level surface and engage the emergency brake. Locate the drain plug underneath the vehicle – it will be on the bottom of the engine near the front passenger side wheel.
Place your drain pan underneath the plug and use your socket wrench to remove it. Be careful, as hot oil will begin draining out immediately. Once all of the oil has drained out, replace the drain plug and tighten it securely with your socket wrench.
Next, locate the oil filter housing on top of the engine (near where you removed the drain plug).
Conclusion
The 2011 Subaru Forester takes 5W-30 synthetic oil.
Leave a Reply