What Kind of Oil Does a Nissan Versa 2012 Take

Author:

Published:

Updated:

The Nissan Versa 2012 takes 5W-30 oil.

The Nissan Versa 2012 takes 5W-20 oil.

What Type of Oil Does a Nissan Versa Use?

If you have a Nissan Versa, you’re probably wondering what type of oil you should use. We’ve got the answer for you! Your Nissan Versa takes 5W-30 oil.

This is a synthetic oil that will help keep your engine running smoothly and efficiently.

Does a 2012 Nissan Versa Use Synthetic Oil?

Yes, the 2012 Nissan Versa does use synthetic oil. This is because synthetic oil provides superior protection for engines, especially in high-performance or high-mileage vehicles. Synthetic oil also tends to last longer than conventional oil, so you won’t have to change it as often.

How Often Does a 2012 Nissan Versa Need an Oil Change?

Assuming you are referring to the 2012 Nissan Versa sedan, it should have a maintenance schedule in the owner’s manual. According to the 2012 Nissan Versa Owner’s Manual, under “Normal Maintenance Schedule,” it states that the engine oil and filter should be replaced every 7,500 miles or 6 months whichever comes first. However, if you frequently drive in dusty or sandy conditions, or do a lot of short trips where the engine doesn’t reach full operating temperature, you may need to change your oil more often.

Some people also like to change their own oil more frequently (every 3-5 thousand miles) as a preventative measure.

How Do You Put Oil in a 2012 Nissan Versa?

If you need to add oil to your 2012 Nissan Versa, the process is actually quite simple. First, make sure that your car is parked on a level surface so that the oil will not spill out when you remove the dipstick. Next, locate the oil fill cap – it should be on the right side of the engine, near the front.

Once you’ve found it, unscrew the cap and wipe off any dirt or debris that might be on it. Now it’s time to actually add the oil. If you’re not sure how much to add, consult your owner’s manual or simply check the dipstick (which should have markings for both minimum and maximum levels).

Pour in the oil slowly, stopping periodically to check the level on the dipstick. Once you’ve reached the maximum level, screw the fill cap back on and start up your engine – letting it run for a few minutes will help distribute the new oil evenly throughout all of its components.

2012 Nissan Versa Oil Change

2012 Nissan Versa Oil Type And Capacity

The 2012 Nissan Versa has a 1.6-liter, 4-cylinder engine that takes 5W-30 oil. The oil capacity is 4.2 quarts with a filter change.

2012 Nissan Versa Oil Capacity

Assuming you would like a blog post discussing the oil capacity of the 2012 Nissan Versa: The 2012 Nissan Versa has a total oil capacity of 4.2 quarts. This means that when you go to change your oil, you will need to purchase 4 quarts of oil and then add in the appropriate amount of oil additives.

The 2012 Nissan Versa takes 5W-30 motor oil.

Nissan Versa 2012 Oil Filter

The Nissan Versa is a great car for anyone looking for an affordable and reliable vehicle. One of the most important maintenance items for any car is an oil change, and the 2012 Nissan Versa is no exception. The oil filter on the 2012 Nissan Versa is located under the hood, on the driver’s side of the engine.

It’s a good idea to check your owner’s manual to find out what type of oil filter your car uses, as well as the recommended interval for changing it.

2012 Nissan Versa 1.6 Oil Type

Assuming you would like a blog post about the 2012 Nissan Versa 1.6: The 2012 Nissan Versa 1.6 requires 5W-30 synthetic oil. This type of oil is designed to flow easily in cold temperatures and maintain its lubricating properties at high temperatures.

It also helps to protect against corrosion and wear.

Conclusion

If you own a Nissan Versa 2012, you might be wondering what kind of oil it takes. The answer is 5W-30 synthetic oil. You should change your oil every 7,500 miles or once a year, whichever comes first.

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest Posts

  • How to Change Oil on an Inboard Boat Motor?

    How to Change Oil on an Inboard Boat Motor?

    To change the oil on an inboard boat motor, locate the oil drain plug and unscrew it. Then, use a pump to remove the old oil from the reservoir. Once the old oil is removed, screw the drain plug back in and refill the reservoir with new oil. Do Inboard Boat Engines Have Oil Drain…

    Read more

  • How to Tell If 2 Stroke Oil Pump is Working?

    How to Tell If 2 Stroke Oil Pump is Working?

    There are several steps you can take to test whether your 2-stroke oil pump is functioning correctly. One is to check the oil level in the tank. If it’s low, then the pump isn’t working. Another way to tell is by starting up the engine and listening for a ticking sound. This sound indicates that…

    Read more

  • How to Drain Oil?

    How to Drain Oil?

    Assuming you would like tips on how to drain your car’s oil, follow these steps: 1. Park your car on a level surface and wait until the engine is cool before proceeding. 2. Find the oil drain plug underneath your car. It is typically located near the middle or back of the vehicle, close to…

    Read more