Author: Michael John
-
How to Tell If Oil Has Friction Modifiers?
To determine if oil contains friction modifiers, several tests can be performed. One test is to add a small amount of the oil to a container of water and observe whether it forms beads or mixes evenly with the water. Another test is to put a drop of the oil on a piece of glass…
-
How to Dispose of Motor Oil Soaked Paper Towels?
The best way to dispose of motor oil-soaked paper towels is to put them in a sealed container and throw them away with your regular trash. You can also take them to a local recycling center that accepts oil-soaked rags. What to Do With Motor Oil Soaked Paper Towels? If you’ve ever changed your own…
-
How to Check Lower Unit Oil in Yamaha Outboard?
To check the lower unit oil in a Yamaha outboard, first locate the oil fill/dipstick on the side of the engine. Remove the dipstick and wipe it clean with a rag. Reinsert the dipstick and remove it again to check the oil level. The oil should be at the complete line on the dipstick. If…
-
How to Tell If Oil Injection is Working on Outboard?
If you’re not sure whether your outboard’s oil injection system is working, there are a few things you can check. First, look for any obvious leaks in the system. If there are no leaks, then check the oil level in the reservoir. If the oil level is low, topping it off may resolve the issue.…
-
How to Clean Motor Oil off Engine?
To clean motor oil off your engine, you will need a few supplies. You will need a pan or catch basin to catch the oil drippings, rags or paper towels, dish soap, and a hose with a spray nozzle attachment. First, place the pan under the engine where the oil is dripping. Second, use the…
-
How to Prime an Oil Pump?
To prime an oil pump, first ensure that the pump is securely mounted and the suction line is installed correctly. Next, fill the pump with oil and then turn on the power. Once the power is on, slowly open the discharge valve until a steady stream of oil is visible coming out. If the oil…
-
How to Change Transmission Oil on Harley Softail?
To change the transmission oil on a Harley Softail, you will need to drain the old oil and then refill the transmission with new oil. You will need to do this every few thousand miles to keep your transmission in good working condition. How Much Transmission Oil Does a Harley Softail Hold? The Harley-Davidson Softail…
-
How to Fix a Head Gasket Oil Leak?
If your car has an oil leak originating from the head gasket, there are several steps you can take to attempt to repair it. First, you can try tightening the bolts that hold the head gasket in place. If that doesn’t work, you can try replacing the head gasket altogether. You’ll need to take your…
-
How to Connect Oil Catch Can?
To connect an oil catch can, first ensure that the can is securely mounted in a location where it will not interfere with any moving parts. Then, use a hose to connect the outlet of the catch can to the drain port on your engine block. Finally, use another hose to connect the inlet of…
-
How to Install Oil Pressure Gauge Chevy 350?
To install an oil pressure gauge on a Chevy 350, first remove the oil sending unit from the engine block. Next, install the new oil pressure gauge in its place and screw it in tightly. Finally, reconnect the electrical connector to the sending unit and start the engine to check that the indicator is working…