How to Check Sportster Transmission Oil?




The transmission oil in a Sportster motorcycle should be checked at least once per year, or more often if the bike is ridden frequently or in dusty or wet conditions. To check the oil level, first warm up the engine by riding the bike for at least 15 minutes. Then remove the dipstick from the side of the transmission and wipe it clean with a rag.

Reinsert the dipstick and screw it back in until it is tight. Remove the dipstick again and check that the oil level is between the “full” and “add” marks on the dipstick.

  • Park your Sportster on a level surface and turn off the engine
  • Remove the oil filler cap from the top of the transmission
  • Insert a clean dipstick into the transmission fill hole and screw it in until it’s tight
  • Remove the dipstick and check the level of transmission oil against the markings on the dipstick
  • Add more transmission oil if needed, then replace the filler cap and start your engine to recheck the level

How Do You Check Transmission Fluid on a Harley?

To check the transmission fluid on a Harley, you will need to first find the dipstick. The dipstick is located on the left side of the engine, near the oil filler cap. Once you have found the dipstick, wipe it off with a clean cloth and reinsert it into the fill hole.

Next, remove the dipstick and check the fluid level. The fluid should be at or above the “Full” line on the dipstick. If it is not, add more fluid until it reaches that level.

Does Harley Sportster Have Transmission Oil?

The Harley Sportster does have transmission oil. This should be checked periodically and topped off as needed. The manual will give you the specifics on how to do this.

Do You Check Harley Transmission Oil on Kickstand?

You should always check your Harley’s transmission oil level when the bike is on its kickstand. This will ensure an accurate reading. To check the oil level, remove the dipstick from the transmission and wipe it clean with a rag.

Insert the dipstick all the way back into the Transmission and then pull it out again. The oil level should be at or slightly below (no more than 1/4 inch) the “FULL” mark on the dipstick. If it’s not, add more oil until it reaches that level.

How Much Oil Does a Sportster Transmission Take?

The Sportster transmission oil capacity is about 1 quart. This is for a manual transmission. The automatic transmission will take a little more oil, about 2 quarts.

How to check gearbox oil level Harley Davidson Sportster XL 1200V seventy-two DIY

Sportster Transmission Oil Capacity

The Sportster is a great motorcycle for those who love to hit the open road. But what many riders don’t realize is that this bike needs some regular maintenance to keep it running smoothly. One of the most important things you can do for your Sportster is to change the transmission oil regularly.

So how often should you change the transmission oil on a Sportster? The general rule of thumb is to change it every 5,000 miles or so. However, if you do a lot of hard riding, you may need to change it more often.

When changing the transmission oil, be sure to use a good quality synthetic oil. This will help protect your transmission from wear and tear. You’ll also want to avoid using too much or too little oil.

Too much oil can cause leaks, while too little can lead to premature wear on your transmission components. To get an accurate measurement of how much oil you need, consult your owner’s manual or ask a qualified mechanic. Once you have the correct amount of oil, simply drain out the old oil and replace it with fresh oil.

Then start up your engine and take her for a spin!

Harley Sportster 1200 Transmission Oil Change

If you own a Harley Sportster 1200, then you know that regular maintenance is key to keeping your bike running smooth. One important aspect of maintaining your Sportster is changing the transmission oil. Not sure how to do a transmission oil change on a Harley Sportster 1200?

No worries, we’ve got you covered. In this blog post, we will walk you through the steps of changing the transmission oil on a Harley Sportster 1200. We will also provide some helpful tips along the way.

So, let’s get started! Step 1: Park your Sportster on a level surface and place it in neutral. Then, engage the parking brake.

Step 2: Remove the saddlebags (if applicable) and other items from around the bike that may be in the way of accessing the transmission drain plug. Step 3: Locate the transmission drain plug which is located under the left side of the engine near where the primary drive meets the transmission case. Place an oil catch pan underneath the drain plug to catch any dripping oil.

Sportster 1200 Transmission Oil Capacity

The 1200 Sportster transmission oil capacity is approximately two quarts. When changing the oil, it is important to check the level and condition of the existing oil. The recommended oil for this transmission is a quality gear lube with an API GL-4 or GL-5 rating.

Sportster Primary Oil Capacity

The Sportster is a line of motorcycles produced by Harley-Davidson since 1957. The models in this line were originally designed to be racing motorcycles, and they still maintain that design today. One key aspect of these bikes that makes them ideal for racing is their primary oil capacity.

The oil capacity of a motorcycle’s engine is important because it determines how long the engine can run before it needs to be serviced. A larger oil capacity means that the engine can go longer between services, which is ideal for racing purposes. The Sportster has one of the largest oil capacities of any motorcycle on the market, making it a great choice for those who want to hit the racetrack.

If you’re looking for a motorcycle that can handle race-level performance, then you need to check out the Sportster. With its large primary oil capacity, it’s sure to keep your engine running strong all race long.


It’s important to check your Sportster transmission oil level regularly to ensure optimal performance and longevity of your bike. Checking the oil level is a simple process that only takes a few minutes. You’ll need a clean, dry cloth and a funnel for this task.

First, locate the transmission dipstick on the left side of the engine. Second, wipe the dipstick clean with the cloth and reinsert it into the Transmission Fill Tube. Finally, remove the dipstick again and check the oil level against the Full line on the dipstick.

If necessary, add transmission fluid through the fill tube using a funnel until you reach the Full line.

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest Posts

  • What Kind Of Oil To Use For Hydraulic Jack?

    What Kind Of Oil To Use For Hydraulic Jack?

    The best oil to use for a hydraulic jack is a lightweight, high-quality oil. The oil should be designed specifically for hydraulic jacks and should have a good viscosity rating. If you’re like most people, you probably don’t think too much about what kind of oil to use for your hydraulic jack. After all, it’s…

    Read more

  • What Kind of Oil Does a 2003 Toyota Camry Take?

    What Kind of Oil Does a 2003 Toyota Camry Take?

    The 2003 Toyota Camry takes 5W-30 motor oil. If you own a 2003 Toyota Camry, you might be wondering what kind of oil it takes. The answer is actually pretty simple – your car takes synthetic oil. This type of oil is designed to protect your engine and keep it running smoothly, so it’s definitely…

    Read more

  • What Will Happen If I Don’t Use Dexos Oil?

    What Will Happen If I Don’t Use Dexos Oil?

    If you don’t use Dexos oil, your car’s engine may not run as smoothly. The oil helps to lubricate the engine and keep it cool. If the engine isn’t properly lubricated, it can overheat and break down. If you don’t use Dexos oil in your car, it’s likely that nothing will happen. Your car may…

    Read more