Category: Blog

To install a Mercury oil block off kit, first remove the lower unit. Next, remove the oil pump and block the oil feed hole with the provided plug. Finally, reassemble the lower unit without the oil pump. How Do You Bypass a 2 Stroke Oil Injection? Assuming you are referring to a 2 stroke oil…

Continue reading →

1. Locate the oil dipstick on your vehicle. In most cases, it will be located near the front of the engine, on the side closest to the driver. 2. Pull out the dipstick and wipe it clean with a rag or paper towel. 3. Insert the dipstick back into its housing and push it all…

Continue reading →

If your motorcycle is leaking oil, don’t panic. In most cases, it’s a simple fix that you can do yourself. The first step is to identify where the leak is coming from. Check all of the hoses and fittings for cracks or leaks. If you can’t find the source of the leak, consult a professional…

Continue reading →

If you overfill your engine with oil, don’t start the engine. Too much oil in the engine can cause damage. The best way to remove the excess oil is to use a turkey baster or similar suction device to remove it from the dipstick tube. Once you’ve removed as much as possible, wipe off the…

Continue reading →

To read oil weight, first identify the oil’s grade on the American Petroleum Institute (API) scale. The lower the number, the heavier the oil. For example, Grade 30 oil is much heavier than Grade 10 oil. Next, find the viscosity index (VI) of the oil. This will be a number between 0 and 100. The…

Continue reading →

Assuming you are referring to a car: 1. Park the car on a level surface and turn off the engine. Let the oil settle for a few minutes so you can get an accurate reading. 2. Find the dipstick near the front of the engine bay, and unscrew the cap/dipstick assembly. Some dipsticks have a…

Continue reading →

The process for changing the oil in a Honda Civic 2016 is as follows: 1. Park the car on level ground and turn off the engine. 2. Place a drain pan underneath the drain plug located on the bottom of the oil pan. 3. Use an appropriate size wrench to remove the drain plug and…

Continue reading →

Assuming you would like tips on resetting the oil life monitor on a Honda Civic: 1. Turn the ignition to the “On” position without starting the engine 2. Press and hold the button for the odometer/trip meter for about five seconds How Do You Reset the Oil Life on a 2016 Honda Civic? In order…

Continue reading →

There are a few things to keep in mind when reading an oil pressure gauge. First, make sure the engine is warmed up before checking the pressure. The oil will be thinner when cold and the pressure will be lower. Also, keep in mind that the oil pressure will fluctuate with engine speed. A good…

Continue reading →