How to Change Fork Oil on Harley Softail?




To change the fork oil on a Harley Softail, first remove the front wheel. Next, remove the fork caps and drain the old oil. Then, add new fork oil and replace the fork caps.

Finally, re-install the front wheel.

  • Park the bike on a level surface and place the kickstand down
  • Remove the front wheel by loosening the axle nuts with a wrench
  • Unscrew the fork cap at the top of each fork tube using an Allen wrench or socket wrench
  • Be sure to hold onto the spring inside so it doesn’t come flying out
  • Drain old fork oil into a container for disposal and then slowly pour new oil into each fork until it reaches the top of the tube
  • Replace fork caps and screw them in hand-tight only
  • Reinstall the front wheel and tighten axle nuts securely with a torque wrench set to 40 ft

How Often Should Harley Fork Oil Be Changed?

Harley-Davidson recommends that fork oil be changed every 25,000 miles. However, many riders change their fork oil more frequently, especially if they ride in dusty or dirty conditions. Some riders change their fork oil as often as every 5,000 miles.

If you’re not sure how often to change your fork oil, consult your Harley-Davidson dealer or service manual.

How Much Fork Oil Does a Harley Softail Take?

If you’re like most Harley-Softail owners, you probably don’t think too much about your fork oil. But the truth is, this important fluid plays a big role in keeping your ride smooth and comfortable. So how much fork oil does a Harley Softail take?

Harley recommends that you change your fork oil every 25,000 miles, or at least once a year – whichever comes first. When changing your fork oil, you’ll need to replace the entire contents of both fork tubes. For reference, each tube holds about 473ml (16 ounces) offork oil.

So why is it so important to keep your fork oil fresh? Over time, the fluid can break down and become less effective at lubricating and cushioning your forks. This can lead to a rougher ride as well as premature wear on other components like seals and bushings.

Not to mention, old or dirty fork oil can also make it harder for your forks to rebound after hitting bumps in the road. To ensure optimal performance from your forks (and avoid any potential issues down the road), be sure to follow Harley’s recommended maintenance schedule for changing your fork oil. Your local dealership should have everything you need to get the job done right – including the correct type and amount offork oil for your bike model.

How Do You Change the Fork Oil on a Harley?

If you own a Harley, chances are you want to keep it in tip-top shape. That means regularly servicing and maintaining your bike. One of the most important maintenance tasks is changing the fork oil.

This ensures that your forks are lubricated and functioning properly. Here’s a step-by-step guide on how to change the fork oil on a Harley: 1. Park your bike on a level surface and place it in neutral.

Apply the brakes and engage the wheel chocks. 2. Remove the front wheel using the appropriate wrench size for your axle nut. Set the wheel aside in a safe place.

3. Loosen but do not remove the upper triple tree clamp bolts using an Allen wrench or hex key. Do not loosen the stem nut at this time. 4) Using a soft cloth, clean any dirt or debris from around the upper and lower fork tube caps (located just below the triple tree clamps).

5) Place a drain pan beneath each fork leg and unscrew each cap slowly to release pressure built up inside the tubes (this helps prevent fluid from spurting out when you remove the caps). Allow all of the old fluid to drain from each tube before proceeding. 6) Inspect each fork tube for wear or damage, and replace them if necessary

7) Once both tubes are empty, screw on their respective caps until they are snug 8) Wipe down eachfork leg with a clean rag 9) Fill each fork tube with new fluid until it reaches just below wherethe tube meets its corresponding cap

10) Screw oneach cap until it is snug 11) Reattachthe front wheel

How Do You Add Fork Oil Without Removing Forks?

If you’re looking to add fork oil without removing the forks, there are a few things you’ll need to do. First, you’ll need to loosen the bolts on the bottom of the forks. Next, you’ll need to remove the dust seal and spring from inside the fork.

Once those are out, slowly pour in your desired amount of fork oil until it reaches the top of the fork tube. Finally, reassemble everything and tighten up the bolts. And that’s it!

You’ve successfully added fork oil without removing the forks.

Delboy’s Garage, Harley Davidson Fork Oil Change !

Harley Fork Oil Substitute

Harley fork oil is a specially formulated oil that is designed to protect your forks and keep them operating smoothly. If you don’t have Harley fork oil on hand, there are a few substitutes that will work in a pinch. One option is to use 10W30 motor oil.

This is a common type of motor oil that can be found at most auto parts stores. It’s a bit thicker than Harley fork oil, so it will provide some extra protection for your forks. Just be sure to change it out more frequently than you would with Harley fork oil, as it will break down quicker.

Another option is to use ATF (automatic transmission fluid). This fluid is thinner than motor oil, so it won’t offer as much protection. However, it’s still thick enough to provide some lubrication and protection for your forks.

Again, just be sure to change it out more frequently if you go this route. If you’re in a real bind, you can even use cooking oil! Just make sure it’s a high-quality cooking oil like olive or vegetable oils.

These oils are actually quite similar to motorcycle fork oils in terms of viscosity and lubricity. So if you’re in a pinch, they’ll do the job just fine until you can get your hands on some proper Harley fork oil.

Harley Fork Oil Change

Harley-Davidson owners love their bikes, and they want to keep them running in top condition. That means regular maintenance, including changing the fork oil. The Harley-Davidson fork oil change is not a difficult task, but it is important to do it regularly.

The recommended interval for changing fork oil is every 5,000 miles (8,000 kilometers). If you ride your Harley more often or in harsher conditions, you may need to change the fork oil more frequently. To change the fork oil, you will need:

-A drain pan -A funnel -Freshfork oil ( Harley recommends Screamin’ Eagle Heavy Duty Fork Oil) -A clean cloth or paper towels -An adjustable wrench -A torque wrench

5 steps to changing your Harley Davidson’s Fork Oil: 1) Place your drain pan underneath the front forks where the drain plugs are located. 2) Remove both drain plugs with your adjustable wrench and allow all of the old fork oil to drain out into your pan.

3) Once all of the old fork oil has drained out, replace both drain plugs and tighten them with your torque wrench to 10 – 12 ft/lbs (13.6 – 16.3 Nm). 4) Fill each fork with newfork oil until it reaches the level of the uppermost hole in the damper rod bolt guide—this is approximately 110 mm belowthe top of each tube when measured fromthe bottomof each tube. Use a funnelto help pour innewforkoil without making a mess.

You can also use a measuring cupwith a pouring spoutto make this easier if desired.) 5) Wipe away any spilledforkoil and reinsertthe spring retainingboltand washerinto each legassembly before tighteningto specificationswithyour torque wrench(10 – 12 ft/lbs or 13.6 – 16Nm).

That’s it! You have now successfully changed your Harley Davidson’s fork oil according to H-D recommendations.

Harley Davidson Fork Oil Type E

Harley-Davidson recommends that you change your motorcycle’s fork oil at least every 5,000 miles, and more often if you ride in dusty or dirty conditions. The type of fork oil that you use is also important, as Harley-Davidson specifically recommends their Type E Fork Oil for all models. This special blend of fork oil has been designed to provide the best possible performance and protection for your Harley-Davidson forks.

How to Check Fork Oil Level Harley

If you’re a Harley owner, chances are you know how important it is to keep your bike in top condition. One of the most important maintenance tasks is checking and changing your fork oil. Here’s a quick guide on how to do it.

First, find a level surface on which to park your bike. You’ll need to remove the front wheel and fender to access the forks, so make sure you have all the necessary tools before you begin. Once the front wheel is off, locate the drain bolts at the bottom of each fork leg and remove them.

Be careful not to lose any parts or damage any surfaces as you work. Allow the old oil to drain completely into a catch pan. With the old oil drained, carefully unscrew the top caps of each fork leg and slowly pour in new fork oil until it reaches the recommended level (usually about halfway up the fork tube).

Replace the top caps and tighten them securely. Now that your new fork oil is in place, simply reattach the front wheel and fender and you’re good to go! Checking and changing your fork oil regularly will help keep your Harley running smooth for years to come.


If you’re a proud owner of a Harley Softail, then you know that maintaining your bike is important. Part of regular maintenance includes changing the fork oil. This may seem like a daunting task, but with our step-by-step guide, you’ll be able to do it in no time!

First, you’ll need to gather the necessary materials. You’ll need fresh fork oil, a drain pan, and a few rags. Once you have everything ready to go, you can begin the process.

Start by removing the front wheel and fender assembly. Then, drain the old fork oil into the pan and dispose of it properly. Next, clean out the forks with some brake cleaner and a rag.

Be sure to get rid of any grime or dirt build-up. Now it’s time to add in the new fork oil. Slowly pour it into each fork until it reaches the proper level.

Now replace the front wheel and fender assembly and enjoy your newly serviced Harley Softail!

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest Posts

  • What Kind Of Oil To Use For Hydraulic Jack?

    What Kind Of Oil To Use For Hydraulic Jack?

    The best oil to use for a hydraulic jack is a lightweight, high-quality oil. The oil should be designed specifically for hydraulic jacks and should have a good viscosity rating. If you’re like most people, you probably don’t think too much about what kind of oil to use for your hydraulic jack. After all, it’s…

    Read more

  • What Kind of Oil Does a 2003 Toyota Camry Take?

    What Kind of Oil Does a 2003 Toyota Camry Take?

    The 2003 Toyota Camry takes 5W-30 motor oil. If you own a 2003 Toyota Camry, you might be wondering what kind of oil it takes. The answer is actually pretty simple – your car takes synthetic oil. This type of oil is designed to protect your engine and keep it running smoothly, so it’s definitely…

    Read more

  • What Will Happen If I Don’t Use Dexos Oil?

    What Will Happen If I Don’t Use Dexos Oil?

    If you don’t use Dexos oil, your car’s engine may not run as smoothly. The oil helps to lubricate the engine and keep it cool. If the engine isn’t properly lubricated, it can overheat and break down. If you don’t use Dexos oil in your car, it’s likely that nothing will happen. Your car may…

    Read more