How to Change Oil Pump?




An oil pump is a mechanical device that helps circulate oil through the engine of a vehicle. Over time, the oil pump may become clogged with debris or fail to work properly. When this happens, it will need to be replaced.

Replacing an oil pump is a relatively simple process that can be completed in about an hour.

  • Park your vehicle on a level surface and engage the emergency brake
  • Place a drain pan underneath the oil pan to catch any spilled oil
  • Loosen the oil drain plug with an appropriate sized wrench or socket and allow the oil to drain into the pan
  • Unscrew the oil filter with an appropriate sized wrench or socket
  • Remove any residual oil from the filter mount with a rag and dispose of the used filter according to your municipality’s regulations
  • Wipe away any dirt or debris from the mounting surface of the new filter before screwing it on by hand until it is snug, then tightening it another 1/2 – 3/4 turn with a wrench or socket

Can You Replace an Oil Pump Yourself?

If your car is due for an oil change, you may be wondering if you can replace the oil pump yourself. The answer is yes, but it’s important to know a few things before you get started. First, check your owner’s manual to see if there are any specific instructions from the manufacturer about replacing the oil pump.

If not, you’ll need to consult a repair manual for your particular make and model of car. Once you have the appropriate information, drain the oil from your car and remove the old oil pump. Next, clean the area around the new oil pump so that debris doesn’t fall into it when you’re installing it.

Then, carefully install the new pump making sure that all of the gaskets and seals are in place. Finally, refill your car with fresh oil and start it up to check for leaks. If everything looks good, then congratulations!

You’ve successfully replaced your car’s oil pump.

How Long Does It Take to Change a Oil Pump?

If you’re referring to an oil change, it typically takes about 20-30 minutes. However, if you need to replace your oil pump, it will take significantly longer – anywhere from 2-8 hours.

Do You Have to Drain the Oil to Replace the Oil Pump?

No, you don’t have to drain the oil to replace the oil pump. The oil pump is located in the oil pan, so all you need to do is remove the old pump and install the new one.

What are the Symptoms of a Broken Oil Pump?

If your car has a broken oil pump, you’ll likely notice some major changes in the way it drives and sounds. Here are four symptoms of a broken oil pump that you should be aware of: 1. Your engine will make louder than normal noises.

A broken oil pump can cause your engine to make strange noises, such as knocking or ticking. This is because the pump isn’t able to properly lubricate the engine’s moving parts, which can lead to metal-on-metal contact. If you hear any unusual noises coming from your engine, have it checked out by a mechanic as soon as possible.

2. Your engine will run hotter than normal. Another symptom of a broken oil pump is an overheating engine. This happens because the lack of proper lubrication can cause friction within the engine, leading to excessive heat build-up.

If your car’s temperature gauge starts climbing into the red zone, pull over and shut off the engine immediately to avoid serious damage. 3. Your car will have low oil pressure.


Oil Pump Failure Symptoms

Oil pump failure is one of the most common engine problems. The oil pump circulates oil throughout the engine to keep all the moving parts lubricated. If it fails, the engine will eventually seize up and fail.

There are several symptoms that can indicate an oil pump is failing: 1) Low oil pressure – if your car’s oil pressure gauge is reading lower than normal, it could be a sign that the pump isn’t working properly. 2) Engine noise – if you hear strange noises coming from your engine, it could be due to a lack of lubrication caused by a failing oil pump.

3) Overheating – if your car starts to overheat more frequently, it could be because the failing oil pump isn’t circulating enough coolant through the engine. If you notice any of these symptoms, it’s important to take your car to a mechanic as soon as possible so they can diagnose and fix the problem before it leads to further damage.

Oil Pump Replacement Price

If your car’s oil pump needs to be replaced, the average cost will be between $524 and $730. The exact price will depend on the make and model of your vehicle, as well as the labor costs at the repair shop. Many times, the oil pump replacement cost can be quite high, so it’s important to get a few estimates before having the work done.

5.3 Oil Pump Replacement Without Dropping Pan

Replacing an oil pump is a relatively easy task that can be completed without having to drop the oil pan. This is a great way to save time and money, as dropping the pan can be quite tedious. Here are the steps you’ll need to take to replace your oil pump without dropping the pan:

1. Remove the old oil pump. This will require removing the bolts that hold it in place. You may need a special tool to remove these bolts, so make sure you have one on hand before beginning this project.

2. Install the new oil pump. Be sure to use new gaskets and seals when installing the new pump, as these are likely to have been damaged when removing the old one. 3. Refill your engine with fresh oil and start it up.

Be sure to check for leaks around the new pump before driving off!

Oil Pump Removal Tool

Assuming you are referring to an oil pump removal tool for a car: Most cars these days have what’s called an “oil pan.” The oil pan is where the oil is stored and drawn from when the engine needs it.

The oil pump is what helps circulate the oil throughout the engine. It’s located under the oil pan and is responsible for making sure the oil pressure in the engine is at optimal levels. If you’re looking to remove your car’s oil pump, there are a few things you’ll need to do first.

You’ll need to drain all of the oil from your car (which you can do by removing the drain plug at the bottom of your oil pan). Once all of the oil has been drained, you’ll need to remove any bolts or screws that are holding your oil pump in place. In most cases, there will be 3-4 bolts/screws that need to be removed.

With those bolts/screws removed, you should then be able to carefully pull out your old Oil Pump.


Changing your oil pump is a simple process that anyone can do with a little time and patience. The most important thing to remember when changing your oil pump is to be careful and take your time so you don’t damage the engine or cause any other problems. The first step is to remove the old oil pump.

This can be done by draining the oil from the engine, disconnecting the electrical connector, and then unbolting the pump from the engine block. Once the old pump is removed, you’ll need to clean up any debris or dirt that may have accumulated on the mating surface of the engine block. Next, you’ll install the new oil pump in its place and bolt it down tight.

Be sure to use a new gasket or sealant when installing the new pump so there are no leaks. Finally, reconnect everything (electrical connector, hoses, etc.) and fill up with fresh motor oil. Start up the engine and check for leaks before taking it for a spin!

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest Posts

  • What Kind Of Oil To Use For Hydraulic Jack?

    What Kind Of Oil To Use For Hydraulic Jack?

    The best oil to use for a hydraulic jack is a lightweight, high-quality oil. The oil should be designed specifically for hydraulic jacks and should have a good viscosity rating. If you’re like most people, you probably don’t think too much about what kind of oil to use for your hydraulic jack. After all, it’s…

    Read more

  • What Kind of Oil Does a 2003 Toyota Camry Take?

    What Kind of Oil Does a 2003 Toyota Camry Take?

    The 2003 Toyota Camry takes 5W-30 motor oil. If you own a 2003 Toyota Camry, you might be wondering what kind of oil it takes. The answer is actually pretty simple – your car takes synthetic oil. This type of oil is designed to protect your engine and keep it running smoothly, so it’s definitely…

    Read more

  • What Will Happen If I Don’t Use Dexos Oil?

    What Will Happen If I Don’t Use Dexos Oil?

    If you don’t use Dexos oil, your car’s engine may not run as smoothly. The oil helps to lubricate the engine and keep it cool. If the engine isn’t properly lubricated, it can overheat and break down. If you don’t use Dexos oil in your car, it’s likely that nothing will happen. Your car may…

    Read more