How to Reset Oil Change Light on Mazda Cx 9




There are a few different ways that you can reset the oil change light on your Mazda CX 9. One way is to simply disconnect the negative battery terminal for about 30 seconds. This will cause the computer to reset and the light should go off.

Another way is to use a scan tool to clear the code that is stored in the computer.

  • Start the engine and let it run for a few minutes to warm up
  • Turn the engine off and locate the oil life reset button on the instrument panel
  • Press and hold the reset button for about five seconds until you see the oil life indicator start to blink
  • Release the button and start the engine to complete the reset procedure

How Do You Turn off the Service Light on a Mazda Cx-9?

The service light on a Mazda CX-9 can be turned off by pressing and holding the “Info” button on the dash for about 5 seconds. The button is located to the left of the steering wheel.

How Do You Reset the Oil Light on a 2015 Mazda Cx9?

Assuming you would like a step by step guide on how to reset the oil light on a 2015 Mazda cx9: 1. Locate the odometer trip knob on your instrument panel. 2. Turn the knob to the right until the oil life indicator displays “0%.”

3. Press and hold the knob for about 10 seconds until you hear a beep to confirm that the system has been reset.

How Do I Clear My Oil Change Message?

Assuming you have a BMW, to clear the oil change message on the iDrive screen, do the following: 1. Press and hold the trip computer button (on the turn signal stalk) until the service interval display appears. 2. Use the rocker switch on the end of the turn signal stalk to scroll through different options until you reach “Reset Service.”

3. Press and hold this button again for several seconds until a confirmation message appears.

Why is My Oil Light Flashing on My Mazda Cx-9?

If your oil light is flashing on your Mazda CX-9, it means that the engine is low on oil. This can be caused by many things, such as a leak in the engine, an improper oil change, or even just driving too hard for too long without changing the oil. If you see this light, it’s important to stop driving immediately and add oil to the engine.

You may also need to have the engine checked by a mechanic to make sure there isn’t any damage being done.

2019 Mazda CX9 oil light reset

Mazda Cx 9 Oil Change Due Won’T Reset

If you own a Mazda CX-9, you know that oil changes are crucial to keeping your vehicle running properly. But what happens when the “due” light for an oil change won’t reset? There are a few things that could be causing this issue.

First, check to make sure that the oil filter has been changed and that the correct amount of oil is in the engine. If everything looks good there, then it’s possible that there is a problem with the sensor itself. In this case, it’s best to take your CX-9 to a qualified mechanic or dealership for diagnosis and repair.

Mazda Cx-9 Service Soon Light

The Mazda CX-9 is a seven-passenger crossover SUV that was first introduced in 2006. The CX-9 is one of the smaller SUVs in its class, but it still offers plenty of passenger and cargo space. It’s powered by a V6 engine and comes standard with front-wheel drive, but all-wheel drive is available.

The CX-9 has a comfortable ride and handles well for an SUV, but its fuel economy isn’t great. If you own a Mazda CX-9, you may have noticed that the “Service Soon” light comes on periodically. This light is simply reminding you to bring your vehicle in for routine maintenance (which typically includes an oil change, tire rotation, and inspection).

It’s important to note that this light does NOT indicate that there’s something wrong with your vehicle; it’s just a friendly reminder from Mazda. If you’re due for routine maintenance and the “Service Soon” light is on in your CX-9, just bring it into your local Mazda dealership or service center and they’ll take care of everything for you. In most cases, an oil change and tire rotation will only take a few minutes while an inspection may take up to an hour or so.

So there’s no need to worry if you see the “Service Soon” light come on in your CX-9 – just schedule an appointment and we’ll take care of the rest!

Mazda Cx 5 Oil Change Due Won’T Reset

If you own a Mazda CX-5, you know that getting an oil change is important to keep your vehicle running smoothly. But what happens if the “oil change due” light won’t reset after you’ve had the work done? There are a few things that could be causing this issue.

It could be a problem with the oil sensor, or there may be an issue with the wiring. In some cases, simply disconnecting and reconnecting the battery may do the trick. If you’re not comfortable troubleshooting the issue yourself, it’s always best to take your car to a qualified mechanic who can diagnose and fix the problem quickly and efficiently.

Don’t let a little thing like an oil change light keep you from enjoying your Mazda CX-5!

Oil Change Due Mazda Cx-5

If you own a Mazda Cx-5, you know that oil changes are an important part of regular maintenance. But what exactly does this service entail? Here’s everything you need to know about getting an oil change for your Mazda Cx-5.

First, it’s important to know how often to get an oil change. For most Mazdas, including the Cx-5, the recommended interval is every 7,500 miles or 12 months – whichever comes first. Of course, this may vary depending on your driving habits and conditions.

If you do a lot of stop-and-go city driving in hot weather, for example, you may need to change your oil more frequently than the recommended interval. When it’s time for an oil change, there are a few things you can expect from your service provider. First, they will drain the old oil from your engine and replace it with fresh, new oil.

They will also check and top off all of your other fluids (coolant, power steering fluid, etc.), as well as inspect your brakes and tires. Finally, be sure to ask about any specials or coupons that may be available for your next oil change – at Mazda of Lodi we frequently offer discounts on this service!


Assuming you would like a summary of the blog post: The oil change light on a Mazda CX 9 can be reset by following these steps: 1. Turn the ignition to the ON position without starting the engine.

2. Press and hold down the trip meter reset button for about three seconds until the oil life indicator appears. 3. Release the button and press it once again for about three seconds until “100%” is displayed. 4. Start the engine to verify that the light has been reset.

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest Posts

  • What Kind Of Oil To Use For Hydraulic Jack?

    What Kind Of Oil To Use For Hydraulic Jack?

    The best oil to use for a hydraulic jack is a lightweight, high-quality oil. The oil should be designed specifically for hydraulic jacks and should have a good viscosity rating. If you’re like most people, you probably don’t think too much about what kind of oil to use for your hydraulic jack. After all, it’s…

    Read more

  • What Kind of Oil Does a 2003 Toyota Camry Take?

    What Kind of Oil Does a 2003 Toyota Camry Take?

    The 2003 Toyota Camry takes 5W-30 motor oil. If you own a 2003 Toyota Camry, you might be wondering what kind of oil it takes. The answer is actually pretty simple – your car takes synthetic oil. This type of oil is designed to protect your engine and keep it running smoothly, so it’s definitely…

    Read more

  • What Will Happen If I Don’t Use Dexos Oil?

    What Will Happen If I Don’t Use Dexos Oil?

    If you don’t use Dexos oil, your car’s engine may not run as smoothly. The oil helps to lubricate the engine and keep it cool. If the engine isn’t properly lubricated, it can overheat and break down. If you don’t use Dexos oil in your car, it’s likely that nothing will happen. Your car may…

    Read more