To read your oil dipstick, remove it from the engine and wipe any oil off of it with a clean rag. Then, reinsert the dipstick into the engine and pull it out again. Look at the end of the dipstick that you just inserted into the engine—this is the “full” mark. Now, look at the…
To check the oil percentage in your Lexus RX 350, you will need to locate the dipstick on the engine. Once you have located the dipstick, pull it out and wipe it off with a clean cloth or paper towel. Next, insert the dipstick back into the engine and remove it again. The oil level…
If you’re worried that your coolant may be leaking into your oil, the best way to check is to take a sample of your oil and have it tested. Many auto parts stores offer this service for free. All you need is a clean, empty container and a few minutes of your time. Once you…
You will need a few tools to do this including a wrench, a pair of pliers, and a catch pan. Loosen the oil drain plug with the wrench and make sure that it is secure before continuing. Place the catch pan underneath the oil pan and use the pliers to remove the oil filter. Be…
To remove antifreeze from engine oil, use a siphon pump to remove the oil from the engine. Next, drain the antifreeze from the radiator and add fresh coolant. Finally, change the engine oil and filter. Will Antifreeze in Oil Damage Engine? Yes, antifreeze in oil can damage engine. Antifreeze is designed to lower the freezing…
1. Place the outboard on a flat surface, such as an oil change pad or a drop cloth. If you don’t have either of these, you can place the outboard on its side on a level surface. 2. Remove the oil cap and dipstick from the outboard. Wipe the dipstick clean with a rag and…
To change the fork oil on a Harley Softail, first remove the front wheel. Next, remove the fork caps and drain the old oil. Then, add new fork oil and replace the fork caps. Finally, re-install the front wheel. How Often Should Harley Fork Oil Be Changed? Harley-Davidson recommends that fork oil be changed every…
If you have burnt oil on your cookware, don’t worry! It is easy to clean. First, fill the sink with hot soapy water. Then, using a scrubby sponge or steel wool, scrub the affected area until the burnt oil comes off. If necessary, use a little bit of elbow grease! Finally, rinse the cookware well…
The process of draining transmission oil is relatively simple and can be done at home with a few tools. First, locate the drain plug on the bottom of the transmission pan and place a drain pan underneath. Then, using a wrench, loosen the drain plug and allow the oil to drain out completely. Once finished,…
If the oil drain plug on your ATV is stripped, you will need to replace it. To do this, first remove the old plug by unscrewing it with a wrench. Then, clean the area around the drain hole with a rag to remove any dirt or debris. Next, take a new oil drain plug and…